Mimosa A5

UISP Switch Pro

UISP Switch Pro

a Layer 2 PoE switch with 24 ports that is intended for ISP networks.

Features:

(24) GbE RJ45 ports, 16 of which provide passive 27 V PoE output (4) 220W 10G SFP+ ports (27V) 15W/port (2-pair) / 30W/port total PoE availability (4-pair)
LCM color touchscreen, 1.3″
The UISP Mobile app makes setting up Bluetooth simple.

ASSIST IN ADDING SUBSCRIBERS

Together with the Mimosa Install App, Auto-Provisioning now significantly speeds up the installation of new subscribers, automates device provisioning, and enables smooth device integration into an ISP network.

 

MIMO SMART QUAD-PANEL TECHNOLOGY

Increase capacity while reducing interference! Mimosa has four distinct 90-degree panels that may broadcast MIMO streams only in the direction of a selected client, constituting the first directional MIMO technology. Additionally, this frees up the access point to use game-changing Multi-User MIMO technology to concurrently transmit to a second client traveling in a separate direction.

 

EASY SETUP

2.4 GHz management radio for local configuration and management from your smartphone. ‡

 

Mimosa A5 Specifications

Performance
Max ThroughputUp to 1.0 Gbps IP (1.7 Gbps PHY)
Client Capacity100 Clients (WiFi Interop); 44 Clients (SRS)
Wireless ProtocolsWi-Fi Interop
Mimosa GPS Sync (TDMA)
Coverage RadiusRecommended < 300 m/1000 ft for optimal performance
Radio
MIMO & ModulationMIMO & Modulation
Bandwidth*20/40/80 MHz channels
Tunable in 5 MHz increments with GPS Sync
Tunable to standard WiFi channels for WiFi Interop
Frequency Range

GPS Sync: 4900-6400*** MHz
WiFi Interop: 5170-5835 MHz

Restricted by country of operation
(*new* US/FCC 5600-5650 support)

Max Output Power30 dBm
Sensitivity ( MCS 0 )-87 dBm @ 80 MHz
-90 dBm @ 40 MHz
-93 dBm @ 20 MHz
Antenna
Gain14 dBi (net of losses into each of four sector panels)
Beamwidth ( 3dB )70º azimuth, 16º elevation
Front-to-Back Ratio>30 dB
Cross-Polar Isolation>20 dB or better
PolarizationCircular, four alternating panels
Power
Max Power Consumption25 W
System Power Method802.3at compliant
System Lightning & ESD Protection6 kV
PoE Power Supply802.3at and Passive PoE compliant, 48-56 V Power over Ethernet supply with IEC61000-4-5 surge protection
Physical
DimensionsHeight: 314 mm (12.36″)
Width: 142 mm (5.61″)
Weight1.75 kg (3.85 lbs)
Enclosure CharacteristicsOutdoor UV-stabilized engineered polymer
Wind Survivability200 km/h (125 mph)
Wind Loading7.72 kg @ 160 km/h (17.03 lbs @ 100 mph)
MountingDual pole strap feed points integrated into metal base with integrated curvature for contact with mounting poles.
Environmental
Outdoor Ingress Protection RatingIP67
Operating Temperature-40°C to +55°C (-40°F to 131°F)
Operating Humidity5 to 100% condensing
Operating Altitude4420 m (14500′) maximum
Shock & VibrationETS 300-019-2-4 class 4M5
Features
Gigabit Ethernet10/100/1000BASE-T
SynchronizationGPS + GLONASS allows for network-wide sync and interference avoidance
Collocation1PPS GPS Tx/Rx synchronization for same tower collocation and channel reuse
Network ProcessingAdvanced AP control for capacity and subscriber management
Access Control ListsPermit, Deny and Remark Layer 2 and Layer 3 traffic flows
Traffic ShapingPer CPE UL/DL commit and maximum rate shaping
Management ServicesMimosa cloud monitoring and management SNMPv2 & Syslog legacy monitoring HTTPS HTML5-based Web UI
2.4 GHz 802.11b/g/n radio for local management access ‡
Smart Spectrum ManagementActive scan monitors/logs ongoing RF interference across channels (no service impact)
Dynamic auto-optimization of channel and interference avoidance
SecurityWPA2 + Mimosa 802.1x RADIUS Future support of WPA2-Enterprise/HotSpot 2.0
Management VLAN support
QoSSupports 4 pre-configured QoS levels
GPS LocationGNSS-1 (GPS + GLONASS)
VLANsPer subscriber VLAN; Q-in-Q, triple tagging; Management VLAN
Regulatory + Compliance
ApprovalsFCC Part 15.407 and Part 90Y, IC RSS210, CE,
ETSI 301 893/302 502
RoHS ComplianceYes
SafetyUL/EC/EN/ 60950-1 + CSA-22.2
 

 

Contact Info

© 2022 Created with 3Gmet